I have a small cut in the hull of my kayak. Is it possible to repair this damage?

I have a small cut in the hull of my kayak. Is it possible to repair this damage?

Yes, even though it is very hard to cut or damage our kayaks, if it does happen, then please order your repair material from one of our dealers where you bought your kayak.  Please note that not all colors maybe available. You will then need a soldering iron to “weld” the repair material into the damaged area.  Please see attached document: "Polyethylene_Repair_Guide.pdf"

High Density Polyethylene used to construct our kayaks is repairable. It may not be possible to repair kayaks that sustain major damage to the hull. Kayaks that suffer from many years of sun exposure may become brittle from UV exposure. High Density Polyethylene contains UV inhibitors, however sun exposure will eventually break down those inhibitors.

Also see more info on Plastic rotomolded polyethylene (HDPE) repairs:- View Article & Video Here

    • Related Articles

    • How to replace the hull support / water bottle holder on a BorealDesign thermoformed ABS kayak

      Here are the necessary things to replace a broken support / bottle holder on a thermoformed ABS kayak. Materials and Tools: a sharp utility knife small prybar sand paper gloves glue - we suggest a high quality plastic/metal adhesive which can be ...

    • How to repair or fix a cracked kayak

      There is no reason why you cannot fix a plastic ABS Thermoformed or Composite boat on your own. Using these resources and the right tools it can be done. If it seems too difficult, then many kayak dealers and also marinas offer this service. Ask ...

    • Shipping Damage Policy & Info on Receiving Delivery Of Your Kayak

      KAYAKS MUST BE INSPECTED FOR DAMAGE BEFORE ACCEPTING DELIVERY It's important to inspect your kayak carefully and thoroughly upon delivery, so that you make sure you have everything you ordered, and that there were no damages in transit. If you have ...

    • How to restore finish and colour to an ABS thermoformed plastic kayak

      It is relatively simple to restore the finish to an ABS thermoformed kayak with the right acrylic lacquer spraypaint and a few simple tools/ materials needed. Download the following article (see bottom of page) for step by step instructions on how to ...

    • Basic kayak maintenance

      We’ve put a lot of time and thought into providing you with a quality craft and we stand behind our product 100%. By reading your kayak’s warranty agreement and following these few simple maintenance steps, you should have years of problem-free fun ...