Is it possible to open up a Beluga bilge pump and clean it out? I have some small rocks inside.

It is not recommended to open up the hand pump but see if the rocks or debris can be flushed out with water,  high pressure hose or a pressure washer maybe

Hope this helps, 

• Related Articles

• How do I assemble the Beluga Kayak Boat Roller?

  Please see the attached document for steps in assembling your Kayak Boat Roller with instructions for use with pictures. Stay tuned for the product video next!

• I have a problem with my skeg, how do I fix my skeg? My skeg control lever only goes down to half way or is stuck

  We recommend the following as different options to fix: Rest or lift the stern (rear of kayak) above the ground or water, so the skeg can lower and raise freely. Try to pull firmly on the skeg to get it down all the way, till skeg reaches its full ...

• How to assemble and adjust your 2 piece paddle (Beluga, Riot or BorealDesign)

  In this short video we show you how to put together and adjust and set the correct length you want on your Beluga, Riot Kayaks or Boreal Design paddle.

• The skeg does not deploy or lower all the way on my Boreal Baffin, Labrador or Pakesso kayak. How do I fix this issue?

  Making an adjustment to your skeg line so it lowers all the way is relatively easy to do. 1) Use tape to secure the skeg so does not fall down; 2) Go to the Skeg-Dial Control, carefully pick off the small black cap cover (it is glued with silicone), ...

• J'ai un kayak de mer en fibre double modèle Béluga. J'aimerais savoir quel sont les meilleurs endroits pour l'appuyer sur les barres de toits

  Bonjour, Placer le kayak sur les barres les plus proches des cloisons est la meilleure option. Sinon, l'utilisation de blocs de mousse en V pour soutenir la coque est également une bonne solution. Si vous avez des berceaux pour kayak qui peuvent se ...