These are the official Baffin kayak plastic specifications on the amount of curve bow to stern the hull should have (otherwise known as rocker). Front height (measured at 1 meter from bow tip) : 50mm Rear height (measured at the end of the skeg box): ...
Hello there, The volume for both the Baffin C3 and Baffin P3 are the same and as follows: Rear Hatch Volume: 95 L Front Hatch Voume: 80 L Middle Hatch Volume: 35 L Total Volume: 210 L Hope this helps, Thanks,
Hello, if your BorealDesign kayak is a more recent model since 2018-19 onwards then the Flex 4 seat cover will fit. You can view and purchase that here: ...
Making an adjustment to your skeg line so it lowers all the way is relatively easy to do. 1) Use tape to secure the skeg so does not fall down; 2) Go to the Skeg-Dial Control, carefully pick off the small black cap cover (it is glued with silicone), ...
For the Baffin Skeg they can be found and ordered here: https://boutiqueborealdesign.com/products/umat-051-baffin-skeg-system-kit For the Flex 4 Backbands you can order them here: ...