A) Replacing and installing a skeg is relatively easy following these 7 steps. See attached file (download at bottom of page) for steps and pictures: 1) Feed the spectra skeg line through while tubing from the skeg box towards the skeg dial and it ...
In this short video we show you the steps to adjust and better centre a loose skeg on a Boreal Design Baffin sea kayak. 1) The two plastic plates on either side of the skeg have bolts that can be adjusted to better hold the skeg in position better. ...
Here are the instructions for the Baffin P1 seat kit (BK002) or the Baffin P2/P3 Seat Kit (BK005), Replacing the seat is very simple. 1.- Remove the old kayak seat by removing the 2 screws on each side of the cockpit rim that hold the seat in place. ...
Making an adjustment to your skeg line so it lowers all the way is relatively easy to do. 1) Use tape to secure the skeg so does not fall down; 2) Go to the Skeg-Dial Control, carefully pick off the small black cap cover (it is glued with silicone), ...
These are the official Baffin kayak plastic specifications on the amount of curve bow to stern the hull should have (otherwise known as rocker). Front height (measured at 1 meter from bow tip) : 50mm Rear height (measured at the end of the skeg box): ...