The Hatch Volumes are as follows for the Baffin kayaks (note these are approximate numbers only): Baffin P1 Front: 86L Rear: 76L Cockpit: 157L Small center hatch: 26L Baffin P2 Front: 90L Rear: 89L Cockpit: 188L Small center hatch: 26L Baffin P3 ...
HI The Baffin was designed with lots of rocker for a few reasons. 1. It can handle rough seas and will ride up and over waves instead of punching through waves. 2. It is very maneuverable and lively again for quick turning in more challenging ...
For the Baffin Skeg they can be found and ordered here: https://boutiqueborealdesign.com/products/umat-051-baffin-skeg-system-kit For the Flex 4 Backbands you can order them here: ...
Yes you can replace the seat back to make it a full Flex 4 seat . You will need: Seat Back: https://boutiqueborealdesign.com/products/flex-backrest-thermo-kit-2 Backrest Cover: https://boutiqueborealdesign.com/products/flex-backrest-cover-a Thigh ...
Hello, you will need one like the Silva 70 P deck mounted compass. https://www.kingdomoutdoor.ca/products/brunton-70p-kayak-deck-flush-mount-compass hope this helps,
Hello there, The volume for both the Baffin C3 and Baffin P3 are the same and as follows: Rear Hatch Volume: 95 L Front Hatch Voume: 80 L Middle Hatch Volume: 35 L Total Volume: 210 L Hope this helps, Thanks,
In this short video we show you the steps to adjust and better centre a loose skeg on a Boreal Design Baffin sea kayak. 1) The two plastic plates on either side of the skeg have bolts that can be adjusted to better hold the skeg in position better. ...
A) Replacing and installing a skeg is relatively easy following these 7 steps. See attached file (download at bottom of page) for steps and pictures: 1) Feed the spectra skeg line through while tubing from the skeg box towards the skeg dial and it ...